TMI5700

Wide Input Range Synchronous Buck-Boost Controller With I2C Interface

数据表

TMI5700_DS_EN_V0.4

产品详细信息

特性

说明

· Wide Input Voltage Range from 3.9V to 34V

· Programmable V_OUT Range from 0.59V to 34V

· Peak Current Mode Control

· Integrated 6V/3A Peak Gate Drive

· Adjustable Cycle-by-Cycle Current Limit by ILIM

· Adjustable Input & Output Average Current Limit

· Adjustable Frequency: 100kHz~1MHz

· External Soft-Start Limits the Input Inrush Current

· Selectable FCCM or DCM with Pulse Skipping

· Cable Impedance Compensation

· Input Under-Voltage Lockout

· Output Short Protection with Hiccup Mode

· Output Over-Voltage Protection by FB

· Thermal Shutdown

· QFN-28 Package, 4mm×4mm×0.75mm

The TMI5700 is a high-voltage synchronous buck-boost controller that operates from input voltages above, below or equal to the output voltage. With a wide 3.9V to 34V input and the output voltage can be either programmed by the FB pin or configured by the I²C interface from 3.08V to 21.5V with 10mV per step and controlled by PWM duty cycle. The control method is based upon current mode control that enables maximum performance under transient conditions.

It also features an adjustable soft-start function and offers protection features including input UVLO & OVP, cycle-by-cycle current limit, input average current limit, output average current protection, output overload protection (OLP), OVP and thermal shutdown. In addition, it features selectable Forced Continuous Conduction Mode (FCCM) or Discontinuous Conduction Mode (DCM) operation for light load.

The TMI5700 integrates an I²C compatible interface for output voltage setting, average current setting, cable compensation etc. The

TMI5700 is available in compact QFN4x4-28.