· Input Voltage Range: 1.1V to 6.5V
· Two Output Voltage Modes 0.5V to 5.5V (Set by Resistive Divider) 0.5V to 3.65V (Set VOUT Select Pin, No External Resistor Required)
· Accurate Output Voltage Accuracy (±1%) Over Line, Load and Temperature
· Ultra-high PSRR: 30dB at 500kHz
· Excellent Noise Immunity: 8μVRMS at 0.5V Output 13μVRMS at 3.3V Output
· Ultra Low Dropout Voltage: 180mV at 3A
· Enable Control
· Programmable Soft-Start Output
· Stable with 10μF or larger Output Ceramic Capacitor
· Support Power-Good Indicator Function
· RoHS Compliant and Halogen Free
The TMI6013 is a high output current (3A), ultralow noise, high accuracy, low dropout linear regulator (LDO), and is capable of sourcing 3A with extremely low dropout. The device output voltage can be set by pin-selectable (up to 3.65V) using a PCB layout without the need of external resistors, thus reducing overall component count, meanwhile, the device can be set with higher output voltage by external resistor divider. The device supports single input supply voltage as low as 1.1V that makes it easy to use. The low noise, high PSRR, and high output current capability make the TMI6013 ideal to power noisesensitive devices such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and RF components. To reduce inrush current with very high accuracy, remote sensing, and soft-start capabilities, the TMI6013 is ideal for powering digital loads such as FPGAs, DSPs, and ASICs. The device is offered in a QFN3.5x3.5-20 package.
在线订购 
样品申请 
陕公网安备61019002000690号 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子