TMI87162

600V Half-Bridge Driver IC

数据表

TMI87162_DS_EN_V1.0

产品详细信息

特性

说明

·Floating channel designed for bootstrap operation Fully operational to +600V

·Tolerant to negative transient voltage dV/dt immune

·Gate drive supply range from 10 to 20V

·Peak output Sink current 0.3A, Source current 0.6A

·No Dead time Design

·The logic operating voltage on the VS pin is up to -15V

·Undervoltage lockout for both channels

·3.3V, 5V and 15V input logic compatible

·Matched propagation delay for both channels

·Logic and power ground +/- 5V offset.

·Lower di/dt gate driver for better noise immunity

·Outputs in phase with inputs

The TMI87162 high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.