TMI4054/H

800mA Li-ion Linear Charger with Thermal Regulation

数据表

TMI4054_H_DS_EN_V1.2

产品详细信息

特性

说明

·Programmable Charge Current Up to 1A

·No MOSFET, Sense Resistor or Blocking Diode Required

·Charge Single Cell Li-Ion Battery Directly from USB Port

·Trickle Current, Constant Current and Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate without Overheating

·<1µA Battery Quiescent Current

·Preset Battery Charging Voltage with ±1% Accuracy TMI4054: 4.2V TMI4054H: 4.35V

·Automatically Recharge

·Charge Statue Indication Pin

·SOT23-5 Package

The TMI4054 and TMI4054H are complete constant-current and constant-voltage linear chargers for single cell Li-ion battery application.

The default battery charge voltage is fixed at 4.2V for TMI4054 and 4.35V for TMI4054H, and the charging current can be programmed by external resistor on PROG pin. The charging current could be programmed up to 800mA with good system thermal design. When the charging current drops to 1/10 programmed charging current value after the BAT voltage reaching battery charge voltage, TMI4054 and TMI4054H automatically terminate the charge cycle with charging current becomes to 0 and CHAG pin status changes. Thermal regulation function can regulate charging current to limit the die temperature during high power condition or high ambient temperature application.

When the input supply is removed, the TMI4054 and TMI4054H automatically enter low current state with less 1μA current dropping from battery side. The SOT23-5 package and less external components make TMI4054 and TMI4054H suited for portable applications.