44118太阳成城(TYC集团)股份有限公司|CHINA·NO.1

首页

TMI4056/H

1A Li-ion Linear Charger with Thermal Regulation

数据表

TMI4056_H_DS_EN_V1.2

产品详细信息

特性

说明

·Programmable Charge Current Up to 1A

·No MOSFET, Sense Resistor or Blocking Diode Required

·Charge Single Cell Li-Ion Battery Directly from USB Port

·Trickle Current, Constant Current and Constant Voltage Operation with Thermal Regulation to Maximize Charge Rate without Overheating

·<1µA Battery Quiescent Current

·Preset Battery Charging Voltage with ±1% Accuracy TMI4056: 4.2V TMI4056H: 4.35V

·Automatically Recharge

·Charge Statue Indication Pins

·SOP8 Package

The TMI4056 and TMI4056H are complete constantcurrent and constant-voltage linear charger for single cell Li-ion battery application.

The default battery charge voltage is fixed at 4.2V for TMI4056 and 4.35V for TMI4056H, and the charging current can be programmed by external resistor on PROG pin. The charging current could be programmed up to 1A with good system thermal design. When the charging current drops to 1/10 programmed charging current value after the BAT voltage reaching battery charge voltage, TMI4056 and TMI4056H automatically terminate the charge cycle with charging current becomes to 0 and CHAG and STDBY pins status change. Thermal regulation function can regulate charging current to limit the die temperature during high power condition or high ambient temperature application.

When the input supply is removed, the TMI4056 and TMI4056H automatically enter low current state with less 1μA current dropping from battery side. The SOP8 package and less external components make TMI4056 and TMI4056H suited for portable applications.